WISHON GOLF CLUBS

Wishon Golf’s Most Popular Driver Design in a Wide Variety of Custom Fitting Options 

 Features:  

•919THI Drivers available in both conventional finish and a Black Oxide finish – all designed with TWGT’s unique bendable hosel .

   •Variable Thickness Face with High MOI delivers the best off center hit performance in the game.

    •All 919THI drivers undergo 6 separate face thickness QC checks during production to ensure the highest conforming smash factor 

  •The 919THI is also available in a beautiful black oxide satin finish with a striking but subtle red top crown highlights for the most modern cosmetic appearance.  

 •Available in conventional finish version in RH 9*, 11*, 13* and 15.5*.  LH in 11*. Black Oxide version in RH in 9*, 11* and 13*.

A Superb Fitting Option for More Control on Tight Holes

  The 919F/D Fairway Drivers are the answer for players looking for a high COR “mini-driver” or for a tee shot club for use on tight par-4 and par-5 holes for greater control without losing any distance normally achieved with a conventional high COR titanium driver. TWHT’s proprietary bendable hosel allows an extremely wide range in custom fitting specs for loft, lie and face angle.

Shallow Face, High COR Face Design for Distance with Ease of Playability  New Soft Stainless Hosel Allows Custom Lie and Face Angle Fitting 

  Features: 

•304 Stainless Steel Hosel is separately welded to the body to enable ease in bending for a wide range of custom lie and face angle bending (+/-4*).

 •31mm Shallow Face Height is ideal for golfers who play off firm, short grass fairways orfor golfers who need more confidence getting the ball well up to fly.

 •HS 350 High Strength Steel Thin Face allows for a high COR for increased ball speed and superb off center hit performance.

 •Reduced Face-to-Back Sole Width reduces the sole to ground contact for more consistent contact with the ball, even from the rough.

 •Available in RH in #2 (12°), #3 (14°), #4 (16.5°), #5 (18°), #7 (21.5°) and #9 (24.5°) in Left hand #3 (15°), #5 (18.5°) and #7 (21°)

Progressive Fairway Wood Profile Design, Fit and Build as all Fairway Wood or as Combined Fairway and Hybrid Set Makeup. 

 Features:

 •The most versatile fairway wood design created. Head size and shape progresses gradually from traditional fairway wood in the #3 and 4 to slightly smaller fairway profile for the #5, to a slightly more narrow fairway to semi-broad hybrid in the #7 and 9

•Twin weight bores allows assembly from traditional fairways  to hybrid lengths as desired for the golfer.

 •The highest smash factor found in a conventional investment cast steel head, achieved through TWGT’s metallurgical experience and knowledge.

365PF offers the best combination of performance and value in a woodhead design.

Bendable hosel allows a range of +/-2º in the lie and the face angle. Hand Select for loft offers +/-1* options for each head model from its designed loft spec.

 •Available in RH in #3(15), #4(16.5), #5(18), #7(21) and #9(24.5).

A Unique Hybrid Design with Thin Face, High COR Performance and a Unique Soft Stainless Steel Hosel for a Wide Range of Lie and Face Angle Fitting Options  

Features:

 •Please scroll down to read comments about the 775HS.

 •Thin, High COR, High Strength HS350 Steel Alloy Face offers higher ball speed for more distance in a hybrid head design.  Few companies can offer a high COR design in a hybrid.

•Unique 304 Stainless Steel Hosel allows for much greater ease in bending lie and face angle to broaden custom fitting options (±4°).

 •Split Level, Narrowed Sole Width to reduce sole to turf contact for more solid shotmaking from fairway or rough conditions.

 •775HS Face Progression is in between that of an Iron and Fairway Wood to enable golfers to play the 775HS with the same ball position and swing motion as an iron of the same loft.

•Available in RH in #2, 3, 4, 5, 6,  LH in #3.

Unique Set Design to be Built to One Length for all Clubs to Deliver a Perfect Match of all Elements of Swing Feel for shot consistency.

  Features:

 •Single length construction ensures all possible elements of swing feel are identical for each club in the set – same MOI, same total weight, same headweight, same balance point – to offer the chance for improved shot consistency.

 •Identical length and lie allow the golfer to use the same stance, same posture, same swing plane forimproved shot consistency. •Optional high COR #5 hybrid with high COR #5, 6, and 7 irons off er proper distance for the low loft clubs at the shorter single length. Other single length sets may lose distance with the low loft clubs. 

•Conventional cast carbon steel in the #8 to gap wedge with 5* loft increments blend with the high COR design of the low loft clubheads to off er proper distance gaps and proper  distance with the high loft clubs. Other single length sets may generate too much distance with the high loft clubs. 

•Available in a #5 hybrid or #5 iron to match the player’s desire and ability, with #6 to 9, PW and Gap Wedge and Sand Wedge.

 •Sterling Irons® Single Length clubs can be built to 36.5”, 36.75 or 37” length for each club as fit by the Clubmaker for the golfer’s comfort and preference. Contrasts with most other single length sets being created for a 37.5” length – which can generate too much distance with the high loft irons.

 •Intended to be custom fit with any Wishon Golf S2S iron shaft model and flex to meet the swing speed, transition/tempo and release point of the golfer.

A Great Wedge Design Made Better… With an All New custom Sole Design 

 Features: 

   •The popular HM Series wedges have been re-designed with a unique custom sole grind to increase playability for more types of wedge shots

    •New Zero Bounce heel grind removes the bounce from the heel end of the sole for more consistency when the face is opened to hit finesse and cut shots

   •Front sole Knock Down grind allows golfers to more easily play low, driving, hands forward shots without digging the leading edge into the ground as much

   •Center to rear sole grind offers conventional bounce for normal shots from all lie conditions

    •Beautiful pearl NiCr plated finish over the 8620 carbon steel body offers a soft feel with a long lasting appearance.

  Available in RH in 52* AW, 56* SW and 60* LW.   LH in 56* SW with conventional sole design.

TWGT’s classic traditional sole wedge design with milled face and Micro-Groove™ scorelines

  Features: 

 •Available in Bright Satin Chrome plating or Dark Nickel Platinum plating finish.

 •Traditional, narrow sole, classic shape/profile stands as the finest overall shape and set-up behind the ball in a TWGT original wedge design.

 •CNC Milled Face combines with TWGT’s unique Micro-Groove™ scorelines to offer the highest level of backspin available in a wedge design.

 •Micro-Groove™ scorelines are more narrow and closer together than traditional scorelines – the Micro-Groove design allows the edges of 5 lines to contact the ball at impact while traditional lines only allow 3.  This is one more key to the enhanced spin design of the PCF Micro Tour wedges.

 •Designed with TWGT’s unique “zero-bounce heel” – all the bounce has been removed from the heel area of the sole to allow golfers to roll the face open without raising the leading edge.  A key to playability from thin grass and even hardpan.

 •Numerous wedge fitting options in 52, 56, and 60 degree lofts.  LH available in  56 degree lofts

PCF Micro Wide Sole Wedges  

Features: •

 •Available in Bright Satin Chrome plating or Dark Nickel Platinum plating finish options.

Unique 2-piece design construction allows game improvement wide sole with traditional head profile at normal headweights.

 •The wide sole is designed with very low bounce – the perfect match of sole angle and width for game improvement.  If you put the traditional amount of bounce on a wide sole, the leading edge will be too far up in the air and can cause bladed shots.

 •Ideal wide sole designed for game improvement – perfect for golfers who have struggled to get the ball out of the sand or hit consistently from tall grass around the green.

 •CNC Milled Face combines with TWGT’s unique Micro-Groove™ scorelines to offer the highest level of backspin available in a wedge design

•Micro-Groove™ scorelines are more narrow and closer together than traditional scorelines – the Micro-Groove design allows the edges of 5 lines to contact the ball at impact while traditional lines only allow 3.  This is one more key to the enhanced spin design of the PCF Micro Wide Sole wedges.

 •Designed in RH 55° sand wedge.

Features:

  •Designed with a thinner face expressly for golfers with a swing speed of 80mph or lower to increase ball velocity.  Golfers with a swing speed of 90mph or higher are NOT to use this driver.

 •The 730CL driver is designed with a High Launch loft of 16° to match correctly with swing speeds lower than 80mph to generate the proper launch angle for maximizing distance.

 •The 730CL Long and High Fairway woods are 20° and 26° loft respectively, and are perfect lofts for a golfer with a sub-80mph swing speed to use to get the ball up easily off the fairway and generate proper distance in between the two woods.   730CL Hybrid Irons  Features:

 •The 730CL hybrids are designed with 6° loft increments because golfers with a sub-80mph wood swing speed do not achieve a useable distance difference between clubs made with less of a loft difference

. •Sub-80mph golfers who sweep the ball off the ground or who have difficulty hitting the ball high enough with conventional irons should opt for the all hybrid irons in the 730CL set.      730CL PW and DW Wedges 

 Features:

 •A perfect match and complement to the 730CL set for the <80mph swing speed player are the PW (48°) and DW (54°). •DW is a Dual Wedge, designed with the right balance of bounce sole angle for use in the sand or in tall grass around the greens.

 •730CL wedges are designed with a taller heel profile and more level topline slope angle, to better “frame” the ball on all shots.  From the sand, the higher heel profile of the DW does help push more sand out behind the ball to assist the slower swinger in getting the ball out of the sand more consistently.

•Both PW and DW are designed with a 0.370″ bore to accept the matching 730CL wedge shafts.

Features:

•The Future Pro stainless steel driver offers a high quality and more durable alternative to cheap aluminum junior heads at a “parent friendly”, economical price.

 •The Future Pro driver is designed with TWGT’s hosel weight bore to allow proper weight fitting for juniors.

 •Designed primarily for junior players, ages 6 to 11, with increased loft (15°) to better match to the slower swing speeds of young junior golfers.   Future Pro Junior Fairway Woods  Features:

 •The Future Pro stainless steel fairway woods also offer a quality alternative to cheap aluminum woodheads at a “parent friendly”, economical price.

 •The Future Pro fairway woods are also designed with TWGT’s hosel weight bore to allow proper weight fitting. •Designed primarily for junior 

players, ages 6 to 11, with increased loft (#3-wood 20°, #5-wood 25°) to truly help young juniors more easily get the ball up to fly off the fairway.   Future Pro Junior Irons 

 Features:

 •The Future Pro stainless steel ironheads also offer a quality alternative to cheap zinc ironheads at a “parent friendly”, economical price.

 •Mirror polish, stainless steel ironheads available in #5 (32° loft), #7 (40°), #9 (48°), DW (Dual Wedge 54°) to also help young players more easily get the ball well up to fly.

 •Future Pro iron lie angles are also designed flatter to better fit juniors.  However, because the Future Pro irons are made from stainless steel, they can easily be bent for lie or loft fitting as needed.   Future Pro Junior Putter  Features:

 •Classic heel and toe weighted putter design for juniors.   Future Pro Junior Shafts  Features:

 •Future Pro Steel and Graphite Shafts allow Clubmakers to be able to offer parents an option as well as create a wider range for shaft fitting and price consideration to the parents.

 •Future pro graphite shafts are very affordably priced to encourage parents to use the proper lighter weight shafts for the younger junior players.

 •TWGT has specifically designed the Future Pro shafts to be the right flexibility for junior players, Ages 6 to 11.   We recommend graphite Future Pro shafts for younger juniors, steel Future Pro shafts for the little older kids as they get stronger.

Unique Set Design to be Built to One Length for all Clubs to Deliver a Perfect Match of all Elements of Swing Feel for shot consistency.  Features: all possible elements of swing feel are identical for each club in the set – same MOI, same total weight, same headweight, same balance point – to offer the chance for improved shot consistency.

 •Identical length and lie allow the golfer to use the same stance, same posture, same swing plane forimproved shot consistency. 

Optional high COR #5 hybrid with high COR #5, 6, and 7 irons off er proper distance for the low loft clubs at the shorter single length. Other single length sets may lose distance with the low loft clubs. 

•Conventional cast carbon steel in the #8 to gap wedge with 5* loft increments blend with the high COR design of the low loft clubheads to off er proper distance gaps and proper  distance with the high loft clubs. Other single length sets may generate too much distance with the high loft clubs.

Available in a #5 hybrid or #5 iron to match the player’s desire and ability, with #6 to 9, PW and Gap Wedge and Sand Wedge.

 •Sterling Irons® Single Length clubs can be built to 36.5”, 36.75 or 37” length for each club as fit by the Clubmaker for the golfer’s comfort and preference. Contrasts with most other single length sets being created for a 37.5” length – which can generate too much distance with the high loft irons.

 •Intended to be custom fit with any Wishon Golf S2S iron shaft model and flex to meet the swing